1984 - 1987 Civic / CRX Billet Aluminum Rear Camber/Toe adjusters

$100.00 $125.00

These adjustable shim plates allow you to select a set camber of 1, 2, or 3 degrees negative or positive. The slotted holes provide toe adjustment by simply rotating the part forward or back. These cars tend to have poor toe issues after lowering and until recently people have shimmed their rear spindles with washers. Within the kit has 2 plates of your choice and all the required hardware.

**Note a second driver side spindle is required for the passenger side to make this swap. It also removes the heavy swing arm bearing which not only locks the rear axle for better cornering, but it also removes quite a bit of weight (up to 15 lbs if the rear sway bar is removed). Below the pictures show a total of 3 degrees negative camber which tucks the wheels in .750" in on the top. As always an adjustable panhard bar is recommended for axle placement.

Item Added.
Adding Item.